Select Page

China Manufacturer Stainless Steel DIN766 Open Link Anchor Chain for Marine Ship Boat diamond roller chain

Product Description

Merchandise Description

 

 

 

 

Open Hyperlink ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Content: (U1:CM370 U2:CM490 U3: CM690)
Open up Website link ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,Url Size(6*3.6D),Test LOAD AND Bodyweight
D(φ) DIANMETER CHAIN Link Size BM1 U1 Open Hyperlink CHAIN BM2 U2 Open up Link CHAIN BM3 U3 Open up Hyperlink CHAIN APPROX Excess weight
Outdoors Duration Outside WIDTH Evidence LOAD BREACKING LOAD Proof LOAD BREACKING LOAD Evidence LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
one/2 12.5 seventy five forty five 28.75 57.eighty one 41.two eighty two.6 56.four 112.8 85.forty one
nine/16 fourteen eighty four fifty.4 34.seventy eight sixty nine.ninety three 51 a hundred and one.9 70.76 141.fifty one 106.fifty five
five/8 16 ninety six fifty seven.6 47.1 94.seventy two 66.two 132.eight 92.ninety four 184.eighty three 139.forty three
11/16 seventeen.five 105 63 56.35 113.31 seventy eight.89 157.seventy eight one hundred ten.fifty five 221.1 178.35
3/four 19 114 68.four sixty six.forty two 133.fifty seven ninety three.six 187.two 130.32 260.sixty four 217.68
thirteen/16 twenty.five 123 73.eight seventy seven.33 a hundred and fifty five.forty nine 108.sixty four 217.27 151.seven 303.forty two 229.fourteen
seven/8 22 132 79.2 89.06 179.08 125.four 250.nine 174.4 349.four 264.forty nine
15/sixteen 24 a hundred and forty four 86.four a hundred and five.ninety eight 213.25 149.nine 298.9 207.nine 415.eight 341.82
1 1/sixteen 26 156 ninety three.six 124.38 250.12 one hundred seventy five.four 350.8 244 488 369.94
1 1/8 28 168 100.eight a hundred and forty four.26 290.08 203.eight 406.seven 283 566 427.04
one 3/sixteen 30 one hundred eighty 108 165.six 333 234.2 467.5 324.nine 649.8 490.ninety eight
1 1/4 32 192 one hundred fifteen.two 188.forty two 378.88 265.6 531.two 396.6 739.3 559.sixty five
1 5/sixteen 34 204 122.four 212.seven 427.seventy two 299.9 599.eight 417.3 834.six 671.fifty two
1 7/sixteen 36 216 129.six 238.46 479.52 336.1 672.3 467.eight 935.seven 707.85
one 1/2 38 228 136.eight 265.seven 534.28 374.four 748.7 521.3 1042.five 788.ninety eight
one 9/sixteen 40 240 a hundred and forty four 294.four 592 414.four 829.1 577.six 1155.2 869.36
one 5/8 forty two 252 151.two 324.fifty eight 652.sixty eight 457.7 915.3 636.8 1273.6 959.3
one 3/4 44 264 158.4 356.22 716.32 502.7 999.six 698.nine 1398 1111.twenty five
1 thirteen/sixteen 46 276 165.six 389.34 782.92 548.eight 1097.6 763.nine 1527.eight 1152.07
1 7/8 forty eight 288 172.eight 423.ninety four 852.forty eight 597.8 1195.six 831.7 1663.5 1256.26
2 fifty 300 180 460 926.09 648.eight 1293.6 902.5 1805 1360.forty one
2 1/16 fifty two 312 187.two 497.fifty four one thousand.five 697.63 1395.three 976.fourteen 1952.28 1485.61
two 1/eight 54 324 194.four 536.54 1078.9 752.33 1504.7 1052.68 2105.36 1648.08
two 3/16 fifty six 336 201.six 577.02 1160.three 809.09 1618.2 1132.1 2264.2 1715.ninety seven
2 5/sixteen fifty eight 348 208.8 618.ninety eight 1244.seven 867.ninety one 1735.eight 1214.4 2428.eight 1844.five
2 3/8 60 360 216 662.four 1332 928.8 1857.6 1299.six 2599.2 1973.29
two 7/16 62 372 223.two 707.three 1422.3 991.75 1983.5 1387.sixty eight 2775.36 2101.fifty six
2 1/2 sixty four 384 230.four 753.66 1515.five 1056.eight 2113.5 1478.sixty six 2957.32 2298.forty seven
2 9/sixteen 66 396 237.six 801.5 1611.7 1123.nine 2247.seven 1572.fifty two 3145.04 2398.1
two eleven/sixteen 68 408 244.eight 850.eighty two 1710.nine 1193 2386 1669.26 3338.52 2522.88
2 3/4 70 420 252 901.six 1813 1264.two 2528.four 1786.nine 3537.8 2697.65
                     

 

 

 

 

 

 

 

 

US $3
/ Meter
|
50 Meters

(Min. Order)

###

After-sales Service: Negbotiable
Warranty: Negbotiable
Material: Alloy
Application: Boat Yacht Mooring
Process: Welded Steel
Certificate: CCS.ABS.Lrs.BV.Gl.Dnv.Nk

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

###

###

OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Material: (U1:CM370; U2:CM490; U3: CM690)
OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,LINK SIZE(6*3.6D),TEST LOAD AND WEIGHT
D(φ) DIANMETER CHAIN LINK SIZE BM1 U1 OPEN LINK CHAIN BM2 U2 OPEN LINK CHAIN BM3 U3 OPEN LINK CHAIN APPROX WEIGHT
OUTSIDE LENGTH OUTSIDE WIDTH PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
1/2 12.5 75 45 28.75 57.81 41.2 82.6 56.4 112.8 85.41
9/16 14 84 50.4 34.78 69.93 51 101.9 70.76 141.51 106.55
5/8 16 96 57.6 47.1 94.72 66.2 132.8 92.94 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.1 178.35
3/4 19 114 68.4 66.42 133.57 93.6 187.2 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.7 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.4 250.9 174.4 349.4 264.49
15/16 24 144 86.4 105.98 213.25 149.9 298.9 207.9 415.8 341.82
1 1/16 26 156 93.6 124.38 250.12 175.4 350.8 244 488 369.94
1 1/8 28 168 100.8 144.26 290.08 203.8 406.7 283 566 427.04
1 3/16 30 180 108 165.6 333 234.2 467.5 324.9 649.8 490.98
1 1/4 32 192 115.2 188.42 378.88 265.6 531.2 396.6 739.3 559.65
1 5/16 34 204 122.4 212.7 427.72 299.9 599.8 417.3 834.6 671.52
1 7/16 36 216 129.6 238.46 479.52 336.1 672.3 467.8 935.7 707.85
1 1/2 38 228 136.8 265.7 534.28 374.4 748.7 521.3 1042.5 788.98
1 9/16 40 240 144 294.4 592 414.4 829.1 577.6 1155.2 869.36
1 5/8 42 252 151.2 324.58 652.68 457.7 915.3 636.8 1273.6 959.3
1 3/4 44 264 158.4 356.22 716.32 502.7 999.6 698.9 1398 1111.25
1 13/16 46 276 165.6 389.34 782.92 548.8 1097.6 763.9 1527.8 1152.07
1 7/8 48 288 172.8 423.94 852.48 597.8 1195.6 831.7 1663.5 1256.26
2 50 300 180 460 926.09 648.8 1293.6 902.5 1805 1360.41
2 1/16 52 312 187.2 497.54 1000.5 697.63 1395.3 976.14 1952.28 1485.61
2 1/8 54 324 194.4 536.54 1078.9 752.33 1504.7 1052.68 2105.36 1648.08
2 3/16 56 336 201.6 577.02 1160.3 809.09 1618.2 1132.1 2264.2 1715.97
2 5/16 58 348 208.8 618.98 1244.7 867.91 1735.8 1214.4 2428.8 1844.5
2 3/8 60 360 216 662.4 1332 928.8 1857.6 1299.6 2599.2 1973.29
2 7/16 62 372 223.2 707.3 1422.3 991.75 1983.5 1387.68 2775.36 2101.56
2 1/2 64 384 230.4 753.66 1515.5 1056.8 2113.5 1478.66 2957.32 2298.47
2 9/16 66 396 237.6 801.5 1611.7 1123.9 2247.7 1572.52 3145.04 2398.1
2 11/16 68 408 244.8 850.82 1710.9 1193 2386 1669.26 3338.52 2522.88
2 3/4 70 420 252 901.6 1813 1264.2 2528.4 1786.9 3537.8 2697.65
                     
US $3
/ Meter
|
50 Meters

(Min. Order)

###

After-sales Service: Negbotiable
Warranty: Negbotiable
Material: Alloy
Application: Boat Yacht Mooring
Process: Welded Steel
Certificate: CCS.ABS.Lrs.BV.Gl.Dnv.Nk

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

###

###

OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Material: (U1:CM370; U2:CM490; U3: CM690)
OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,LINK SIZE(6*3.6D),TEST LOAD AND WEIGHT
D(φ) DIANMETER CHAIN LINK SIZE BM1 U1 OPEN LINK CHAIN BM2 U2 OPEN LINK CHAIN BM3 U3 OPEN LINK CHAIN APPROX WEIGHT
OUTSIDE LENGTH OUTSIDE WIDTH PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
1/2 12.5 75 45 28.75 57.81 41.2 82.6 56.4 112.8 85.41
9/16 14 84 50.4 34.78 69.93 51 101.9 70.76 141.51 106.55
5/8 16 96 57.6 47.1 94.72 66.2 132.8 92.94 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.1 178.35
3/4 19 114 68.4 66.42 133.57 93.6 187.2 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.7 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.4 250.9 174.4 349.4 264.49
15/16 24 144 86.4 105.98 213.25 149.9 298.9 207.9 415.8 341.82
1 1/16 26 156 93.6 124.38 250.12 175.4 350.8 244 488 369.94
1 1/8 28 168 100.8 144.26 290.08 203.8 406.7 283 566 427.04
1 3/16 30 180 108 165.6 333 234.2 467.5 324.9 649.8 490.98
1 1/4 32 192 115.2 188.42 378.88 265.6 531.2 396.6 739.3 559.65
1 5/16 34 204 122.4 212.7 427.72 299.9 599.8 417.3 834.6 671.52
1 7/16 36 216 129.6 238.46 479.52 336.1 672.3 467.8 935.7 707.85
1 1/2 38 228 136.8 265.7 534.28 374.4 748.7 521.3 1042.5 788.98
1 9/16 40 240 144 294.4 592 414.4 829.1 577.6 1155.2 869.36
1 5/8 42 252 151.2 324.58 652.68 457.7 915.3 636.8 1273.6 959.3
1 3/4 44 264 158.4 356.22 716.32 502.7 999.6 698.9 1398 1111.25
1 13/16 46 276 165.6 389.34 782.92 548.8 1097.6 763.9 1527.8 1152.07
1 7/8 48 288 172.8 423.94 852.48 597.8 1195.6 831.7 1663.5 1256.26
2 50 300 180 460 926.09 648.8 1293.6 902.5 1805 1360.41
2 1/16 52 312 187.2 497.54 1000.5 697.63 1395.3 976.14 1952.28 1485.61
2 1/8 54 324 194.4 536.54 1078.9 752.33 1504.7 1052.68 2105.36 1648.08
2 3/16 56 336 201.6 577.02 1160.3 809.09 1618.2 1132.1 2264.2 1715.97
2 5/16 58 348 208.8 618.98 1244.7 867.91 1735.8 1214.4 2428.8 1844.5
2 3/8 60 360 216 662.4 1332 928.8 1857.6 1299.6 2599.2 1973.29
2 7/16 62 372 223.2 707.3 1422.3 991.75 1983.5 1387.68 2775.36 2101.56
2 1/2 64 384 230.4 753.66 1515.5 1056.8 2113.5 1478.66 2957.32 2298.47
2 9/16 66 396 237.6 801.5 1611.7 1123.9 2247.7 1572.52 3145.04 2398.1
2 11/16 68 408 244.8 850.82 1710.9 1193 2386 1669.26 3338.52 2522.88
2 3/4 70 420 252 901.6 1813 1264.2 2528.4 1786.9 3537.8 2697.65
                     

What is a roller chain?

What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.

Roller chains are used to transmit power from one shaft to another

Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.
chain

They are interchangeable

There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.

They reduce wear with internal lubricants

In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
chain

They can be used to speed up or slow down machines

Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.

China Manufacturer Stainless Steel DIN766 Open Link Anchor Chain for Marine Ship Boat     diamond roller chainChina Manufacturer Stainless Steel DIN766 Open Link Anchor Chain for Marine Ship Boat     diamond roller chain
editor by czh 2023-01-29

silent chain

As one of leading silent chain manufacturers, suppliers and exporters of products, We offer silent chain and many other products.

Please contact us for details.

Mail:silentchain.cc

Manufacturer supplier exporter of silent chain

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts