CZPTi bulldozer 320hp SD32
Contact: Van
Chongfa NTAA855-C360S10 engine is equipped with exhaust gasoline turbocharger, showcasing powerful electricity and high performance and strength-conserving, and can work normally even in the highlands as high as three,600m. Based on the customers’ needs, the alternative Cumins and Weichai engines are CZPT.
The substantial dependability electricity shift transmission, the steady hydraulic torque converter, and two-phase spur gear last drive feature high electricity transmission capability and effectiveness and large productiveness.
The independent engine h2o tank, the chassis oil cooler, and the water-air intercooler built-in in the Chongfa engine provide prominent cooling efficiency and basic upkeep operations to promise the continuous functioning of the equipment.
The full box-sort primary frame with software of large performance supplies and substantial power castings features higher carrying ability towards affect load and bending moment to support the continuous large-strength doing work of device underneath extreme functioning condition and the large high quality welds ensure the daily life cycle of the principal frame.
The reduced-generate closing generate can provide strong push pressure and successful gradeability. CZPTi’s crawler chassis has reached the intercontinental advanced level in approach stage and can adapt to various difficult doing work circumstances, showcasing large dependability and carrying potential.
The standard straight tilting blade characteristics effective cutting power and the single-shank and three-shank rippers of adjustable penetrating angle can be utilised for the ripping of clay and frozen earth as nicely as the stripping of tough doing work faces, these kinds of as gravel and hardened salt mine.
Duration × width × height (mm) (excluding ripper) | 8560×4130×3640(which includes ripper) | Working excess weight (t)(excluding ripper) | 37.2 |
Motor product | NTA855-C360S10 | Net electricity/rated pace (kW/rpm) | 235/2000 |
Ground stress(Mpa) | .a hundred and five | Blade type | Straight tilting blade Angle blade Semi-U blade |
Blade ability(mthree) | ten for straight tilting blade 6.2 for angle blade 11.7 for Semi-U blade |