Micro channel parallel stream radiator expert manufacturer
The condenser-a part of the air conditioning circuit-is integrated into the motor cooling module, the place it is used to awesome down and condense the compressed, gaseous refrigerant from the compressor. We generate brazed, flat tube condensers that produce substantial overall performance in spite of their compact and light-weight design. They make certain quick cooling of the passenger compartment many thanks to optimum matching of warmth transfer and pressure drop on equally the coolant and the air facet.
The condenser is a warmth exchanger in a cellular A/C program. Today, condensers are typically manufactured of aluminum, but in the earlier, some have been created of copper/brass. Condensers appear really much like radiators, just a little thinner, and because they also depend on air flowing by way of them, are normally situated in entrance of the radiator.
Like radiators and evaporators, condensers are also made as a collection of tubes with fins about them. its job is to launch heat. More especially, to release the warmth the refrigerant absorbed although it was flowing by way of the evaporator, extremely significantly the very same way the radiator releases the heat from motor coolant that the coolant absorbed whilst it was flowing by way of the engine. The refrigerant enters the condenser as a higher-force vapor, but as it flows via the condenser and cools, it turns again into a cooler large-force liquid.
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory
1. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
2. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.
Lengthy expression business is based mostly on our trustworthy solutions, rapidly respond and our professional knowledge to Car AC. We are going to grow to be your spouse, not just your supplier.
1.CAD Drawing, and mould style foundation on your sample
2.Mould take a look at and sample verification ahead of mass generation.
three.CZPTers of numerous shipping and delivery lines.
four.competitive freight gives and one-cease service on clearing, transport troubles.
|Q1. Are you a factory or buying and selling organization?||A: we’re a self -personal manufacturing unit, we provide one-end service for our customers, from spare areas to condenser, from technical income to shipping and delivery and to following-product sales, so as to save the price for customer, handle the good quality and direct time, offer the ideal companies|
|Q2: In which is your manufacturing facility found? How can I check out there?||A: Our manufacturing facility is situated in HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
|Q3. What is actually the manufacturing time for new molds and mass manufacturing?||A: seven-ten days to create the new moulds, mass creation will take about twenty-25days for a single 20gp,25-30days for one particular 40hq, can procedure urgently if want.|
|This autumn: What is the payment terms?||A: Telegraphic Transfer (T/T) and Letter of Credit rating (L/C).|
|Q5: Can you send out me samples?||A: Of course, Samples are for free of charge, and freight is on your side.|