Select Page

All Hydraulic Diamond Coring Drill Rig

All Hydraulic Diamond Coring Drill Rig

Doing work Parameters
Main shaft rotation velocity CZPT load: ≥ 1700r/min (velocity reducer ratio two.2: 1)
≥ 820r/min (velocity reducer ratio three.5: one)
Principal shaft rotation velocity with load: ≥ 1300r/min (pace reducer ratio two.two: 1)
Drilling output: 40-60m per six hours for standard conditions, if hardness is not big, drilling output
Will be much more.
Torque of axle: ≥ 650 Nm(pace reducer ratio two.two: 1 rotation pace four hundred rpm)
Axle pushing pressure: >53KN
Axle pulling force: >66KN
Drilling angle: -360°
Surface obliquity: 30° -90°
Generate head stroke: 1600 mm
H2o usage: 5-10m3/day, dependent on different weather and this is for cycled use.
Main recovery: ≥ 75% if the ore human body structure is not built-in.
≥ eighty five% if the ore entire body composition is integrated.
Overall weight: 1750 kg(principal physique: 550kg+ Electricity device: 700kg+ Operation panel: 112kg)
Outer proportions:
Main body: 2370× 300× 500mm
Power device: 1530× 1100× 1210mm
Procedure panel: 550× 450× 1150mm

Primary Body
The device human body is composed of the following areas:
one. Chuck and speed reducer assembly which includes:
Pace reducer: Ratio two.2: one
Chuck and manual sleeve
CZPT motor

Functioning stress: 20Mpa
Maximum force: twenty five Mpa
Theoretical drainage: 80ml/r, the least drainage 35ml/r

2. Holder assembly
3. Mattress human body
Oil cylinder in bed body undertake GG012-80/40x800x1060
Chain adopt one# and one 1/4# two sorts of bush roller chain.
Electrical power handcart
Electricity handcart is composed of the adhering to components:
1. Y series 3-stage squirrel-cage asynchronism motor
Voltage: 380 V
Frequency: fifty Hz
Rotational frequency: 1480 r/min
Electricity: 55Kw
two. Large pressure axial plunger pump
Motor oil way plunger pump(principal pump)
Rated pressure: 31.five Mpa

Theoretical drainage: 800 ml. /r(ninety% of the oil pump drainage)
Max. Theoretical torque: 439.6 Nm
Feed oil cylinder oil way plunger pump(service pump)
Rated force: 31.five Mpa
Theoretical drainage: ten.9 ml/r
Max. Theoretical torque: fifty four.eight Nm
3. Oil filter
Filtration precision: ten μ M
4. Cooler
Oil pressure: one.six Mpa(max)
Drinking water strain: 1 Mpa(max)
5. Relief valve
Rated circulation: 401/min
Adjustment pressure scope: 16-32 MPa
6. CZPTal drive pump for hydraulic oil refill: Utilised for including hydraulic oil
seven. Strolling wheel
Excellent features:
Unmatched substantial drill head and spindle pace, which allows higher drilling pace
Total hydraulic driven and handle method, like:
CZPT rod feeding, pushing and pulling method
CZPT rod rotation driving technique
Excellent high quality key factors created of plane grade materials, fabricated with
Professional aircraft business equipment
Electrical power supply can be created by electrical motor/generator assembly.
Drilling angle adjustable between 0° And 360°
Advanced winching program
Versatile rotation foundation frame. Can effortlessly change the direction by rotating the foundation
Design and style.

Secondary hydraulic oil filter. To make the filtration for hydraulic oil far more risk-free, we set
Up the secondary filter in the chuck which will exhibits as a crimson level.

Magnetic avoidance for hydraulic oil. Even if we have the very first phase filtration for
CZPT oil from the oil tank, but we also set up the robust magnetic on the tank to
Take in any chips so as to keep away from it goes to up coming step.

Oil temperature sensor. In order to hold the temperature of hydraulic oil at protected degree,
We configures with the temperature sensor in the flow to monitor and feedback throughout
The perform.
CZPTal perform recorder. We configure with this electrical recorder so that there will be
Obvious file and report to verify how much perform has been completed.
4 shifts design. High and minimal change by stepless shift change For hydraulic change method
Two shifts for mechanical shifts mode.
A lot more advanced, a lot more humanized, a lot more optimized layout for whole doing work program.

Drilling depth(m) Gap Dia.(mm) Rod Dia.(mm) Substance of Rod
380 95 89 Metal
480 seventy five 71 Steel
600 59 55.5 Metal

All Hydraulic Diamond Coring Drill Rig

silent chain

As one of leading silent chain manufacturers, suppliers and exporters of products, We offer silent chain and many other products.

Please contact us for details.

Manufacturer supplier exporter of silent chain

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts