Select Page

2000PCS single pole dc motor factory made in China – replacement parts – in Essen Germany Per 8 Hours Steel Drum Production Line with top quality

2000PCS single pole dc motor factory  made in China - replacement parts -  in Essen Germany  Per 8 Hrs Steel Drum Generation Line with best good quality

We – EPG Team the largest worm gearbox, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Complete metal drum production line


I. Uncooked resources usage/creation potential

Plate thickness (mm) Finihed drums (pcs/T) Creation ability (kg/computer)
1.two forty one 21.5
1.0B Up and base addresses 1.2 47 19
Drum body 1.
1. fifty 18
0.9B Up and bottom handles 1. 54 16.eight
Drum human body .9
0.9 56 16.2
.8   ninety seven 10.28


II. Comprehensive steel drum production services

A. Entrance area products
1. Decolier
two. Hydraulic Up-coiling device
three. Hydraulic supporter
4. Side deviation rectifying unit
five. Sizing & flattening device
6. Reducing device – for drum physique
7. Slicing machine – for squander sheet
8. Arch shape guiding unit
nine. Stac ept vehicle
10. Hydraulic program
11. Electric control system
12. Prime & Base protect conveyor unit

1.Hydraulic Up-Coiling  Device

   a) Up-Coiling Assist System is for storing metal coil and facillitate Materials Feed Trolley for delivering content.

   b) Materials Feed Trolley is employed for carry metal coil.. It is operated with hydraulic system to thrust cylinder for

   reciprocating linear motion and equipment box to produce metal coil in parallel to the heart of uncoiling unit so as to

   assure the fixing.

two.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor electricity: 5.0KW

d)Uncoiler capacity: 10t

e)Within diameter: ¢470-520mm, Outside diameter: ≤¢1200

f)Equipment dimensions: 3900x1500x1940(mm), Whole bodyweight: 5T

three.Sizing &Flattening Equipment
Quick introduction:7 rollers doing work,servo automated sizing,worm and equipment alter the leveled plate thickness.

Purpose:The clearances of up and down rollers can be modified by the upper hand-wheel whilst figure can be revealed by dial indicator. The operation linear speed is adjusted step-less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Primary technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

four. Chopping Device
Operate: Cut the leveled steel plate into drum human body.

Major technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor electricity: 3.0KW

d)Cutting capability:≤20 moments/min

e)Device measurement:1800x950x1500(mm),Total weight: 3T

 5.Hydraulic Station

Purpose:Give oil for the oil cylinder of decoiler, lifting device,uncoiling supporter,and overturn equipment to make confident stably working.

Principal technics:

a)Motor electricity:7.5KW

b)Device dimensions:800x800x1500(mm),Whole weight: .5T

6.Electric powered Manage Method
Operate: Control the decoiler,flattening device and other front part equipments working.

B. Protect tools
one. Best & Bottom protect mould
two. Double loc ept mould
3. 63T pressing machine
4. 160T pressing device
5. Pre-coiling & Gluing device

one. Best & Bottom cover mould

Quick introduction:Geared up with two sets of 160T urgent machines

Purpose: Punching the bottom cover

Primary technics:

a)Motor energy:18.5KW

b)Wor ept potential:5-26 pcs/min

c)Machine dimensions:2185x1420x3070(mm),Whole fat: 14.5T

two.Drum Injection Mould

Short introduction: Equipped with a single established of 63T urgent device

Double punching mould: punch oil filler and breathable mouth of the bottom cover.

Machine dimension: 710x480x300(mm)

Total bodyweight: .5T

Double loc ept mould: lock oil filler and breathable mouth of the base cover.

Device measurement: 710x480x300(mm)

Complete bodyweight: .5T

Primary technics:

a)Motor electrical power: 11KW

b)Device dimensions :1800x1232x2550(mm)

c)Complete fat: 5.5T

three.Pre-Coiling & Gluing Equipment

Short introduction: Pre-coiling device for the base go over, cylinder drive the cam to perform, automatic glue- spaying program.It has advantages of basic safety,stablity, smooth edging.

 Main technics:

a)Machine dimensions:1600x1400x1350(mm)

b)Whole excess weight: 4.5T

C. Middle section equipment

1. Stac ept desk
two. Circle-rolling device
3. Seam welding machine
four. Edging & Beading device
five. Corrugation (W Rib) equipment
6. Edge-curling device
seven. Convey gadget
eight. Electric powered management program
nine. Leakage chec ept equipment

one.Circle-rolling Device

Short introduction:3 rollers operating.

Principal technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor power:1.5KW

e)Equipment measurement:2200x750x1300(mm),Complete fat: 1.5T

two.Seaming Equipment(BH-one hundred fifty-5Z)

Short instruction:This automatic seaming machine dismisses the place welding process,it is our newly  developed drum seaming device.All of factors adopts domestic exceptional raw substance,cupreous welding rollers.

Primary technics:

a)Welding Equipment potential:150KVA

b)Driving type: pneumatic 

c)Existing: alternating present

d)Frequency range: higher frequency

e)Wor ept concept : contravariant 

three.Edging&Beading Device

Short introduction:managed by PLC,hydraulic travel

Main technics:

a)Beading height:≤14mm

b)Drum top:894-905(mm)

c)Hydraulic program strain:8Mpa

d)Air strain:.1Mpa

e)Device dimension:3700x700x1600(mm),Overall excess weight: 5T

Hydraulic Station:

Major technics:

a) Machine measurement: 1800x860x1700 (mm)

b) Total weight: 1T

c) Motor power: 22KW

4.Corrugation (W rib) Equipment

Brief introduction:controlled by PLC,hydraulic generate

Principal technics:

a)Corrugating top:≤3mm

b)W rib top:≤9mm

c)Drum peak:884-895(mm)

d)W rib area:280mm

e)Motor power:11KW

f)Device measurement:4500x650x2100(mm),Complete bodyweight: 7T

Hydraulic station:   

a)Equipment dimension:1800x860x1700(mm)

b)Overall excess weight: 1T

c)Motor power: 7.5KW

5.Edge-Curling Equipment

Short introduction:controlled by PLC,hydraulic drive,7 layers edge curling.

Primary technics:

a)Drum height:886-897(mm)

b)Motor energy:45KW

c)Device size:4800x1300x2200(mm),Complete bodyweight: 13T

Hydraulic station:   

a)Machine size:1800x860x1700(mm)

b)Whole excess weight: 1T

c)Motor electrical power: 7.5KW

six.  Leakage Chec ept Machine

Brief introduction:Handbook/automated handle,pneuma lock.

Major technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum peak:886-897(mm)


d) Machine size:2530x700x1100(mm),Complete weight: 2T

7.Multi-section Express Gadget

Brief introduction:Convey the drum human body to be edged,beaded,Corrugated W rib bolstered and sealed bottom go over with PLC managing.

Major technics:

a) Motor energy:4.0KW

b) Machine dimensions:11000x2100x1000(mm)

c) Whole excess weight: 3T

D. Rear part products
one. Entrance area trans-line
two. Degreasing & Phosphorization room
three. Washing & Drying place
4. Overturn products
5. Painting area
six. Entrance drum-separation device
seven. Drying room after portray
8. Bck drum separation equipment
nine. Air cooling system
10. Rear part trans-line
eleven. Electrical handle method

1. Degreasing & Phosphorization Area

Limited introduction: This element is utilized to transport the drums,managed by PLC, adopts spraying system to computerized clean the coil, phosphorize and washing the grease on the drums. The conveyor unit adopts excellent metal, inwalls are made of  1mm steel plate.

Major technics:

a)Device size:36000x2110x2060(mm)

b)Whole fat: 30T

two. Washing & Drying Space

Limited introduction:Drying the drinking water on the area of the drum, controlled by PLC.The complete device adopts fuel heating products.Supporter is set up on the prime of the space, so that sizzling and biking wind can be produced to pace up the drying.

Principal technics:

a) Motor electrical power:25KW

b) Machine dimensions:20000x1920x3600(mm)

c) Complete bodyweight: 25T

3.Painting Room(double hues)

Purpose:  The conveyor system is controlled by PLC, rotating desk make the drums closely, painting technique paint the drums in & outside the house with the spray gun. One particular coloration or various can be option. Method of h2o-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Manufacturer, Portray gear is made of Chang Jiang.

Major technics:

a) Motor electricity: 55KW

b) Machine dimensions: 7400x4990x3600(mm)

c) Total weight: 15T

four.Entrance Drum Distributor

Operate: Transport the drums to the conveyor line of exterior painting&stiffening space, the cylinder is controlled by PLC.

Main technics:

a) Motor energy: 2.0KW

b) Machine dimension: 1500x1050x800(mm)

c) Whole weight: 1T

five.Drying Line after Painting

Purpose: The conveyor device is controlled by PLC, adopts fuel heating inwall of the area is outfitted with heating tubes. Admirer is mounted on the best of the place, so that dry the paint.

Major technics:

a) Motor power: 35KW

b) Equipment dimension: 36000x2100x4300(mm)

c) Complete fat: 30T

6.Down-drum Roller Trans-line

Function: The device transports the dried drums to the ground.

Principal technics:

a) Motor electricity: 1.5KW

b) Machine dimensions:2000x900x800(mm)

c) Total weight: .3T

7.Overturn Equipment

Operate: Adjust the state of drums from horizontal to vertical, so that it will be much easier to paint, managed by Cylinder.

Main technics:

a) Machine dimensions: 1400x690x850(mm)

b) Total weight: .5T













/ The use of unique tools manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined alternative parts contained herein are not sponsored, authorized, or produced by the OEM. /

2000PCS single pole dc motor factory  made in China - replacement parts -  in Essen Germany  Per 8 Several hours Steel Drum Generation Line with best high quality

2000PCS single pole dc motor factory  made in China - replacement parts -  in Essen Germany  Per 8 Hrs Metal Drum Generation Line with prime quality

silent chain

As one of leading silent chain manufacturers, suppliers and exporters of products, We offer silent chain and many other products.

Please contact us for details.

Manufacturer supplier exporter of silent chain

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts