Select Page

E410 E470 Cold Drawn Seamless Carbon Steel Honed Tube for Hydraulic Cylinder

E410 E470 Cold Drawn Seamless Carbon Steel Honed Tube for Hydraulic Cylinder

Component I: Merchandise INTRODUCTION
1. Description: 
Honed tube is a kind of smooth bore metal tube employed to manufacture hydraulic cylinder barrels that is the core portion of a piece of hydraulic cylinder. 

2. Commodity: E410 chilly drawn seamless honed tube for hydraulic cylinder

3. Measurement selection: 40mm*30mm-580mm*500mm

four. Offered metal quality: 

SAE/AISI:  SAE1571, SAE1026, SAE1045, SAE4130, SAE4140
DIN:  ST52, ST52.three, ST52.4
EN:  E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470
GB:  twenty#, forty five#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, 

5. Manufacture method: Chilly rolled, hydraulic chilly drawn, very hot rolled+deep hole dull

6. Shipping problem: 

+C +LC +SR +A +N
Chilly rolled Cold drawn Tension relieved Annealed Normalized Quenched+Tempered

7. Bore treatment: Honing, skiving&roller burnishing

8. Bore roughness manage: Ra0.25um max or Ra0, 35um max for honed tubes, Ra0.25um max for skived&roller burnished tubes. 

nine. End finish: Simple finishes with sq. cuts, free of charge of burrs for honed tubes. Little bevelled ends for skived&roller burnished tubes. 

ten. CZPT export packing: In bundles tied with metal strips. Int&ext oil coating. End plastic caps. Exterior packing by PVC baggage and knit baggage. 

11. CZPTized packing and marking can be supplied upon request. 

twelve. H8 tolerance: 

ID range Tolerance ID assortment Tolerance
18< d ≤30 +/+.033 one hundred eighty< d ≤250 +/+.072
30< d ≤50 +/+.039 250< d ≤300 +/+.081
fifty< d ≤80 +/+.046 three hundred< d ≤315 +/+.081
eighty< d ≤120 +/+.054 315< d ≤400 +/+.089
one hundred twenty< d ≤180 +/+.063 four hundred< d ≤500 +/+.097

13. Distinction amongst honed tube and skived&roller burnished tube: In hydraulic cylinder industry, there are 2 solutions for bore treatment: Honing, and skiving&roller burnishing. Honing or skiving&roller burnishing prospects to different interior floor picture, but the two guarantee good roughness. 

Interior Surface Problem OF HONED TUBES:


Element II: Usually Requested Inquiries
1. MOQ: 
CZPTly Min Purchase Amount can be 2-three tons/dimension for tubes with OD under 250mm, and 10 tons/size for tubes with OD earlier mentioned 250mm. At times, it relies upon on steel quality you require. If you require unique quality like E410, E470 or alloy metal tube, MOQ need to be 10 tons/dimension at least. 
two. Supply Time: CZPTly, our shipping and delivery time for honed tubes is about forty-sixty times dependent on the dimensions and quantities. It will take us 15-30 days to get raw material. For instance, if you need 3 tons of tiny size honed tubes 50mm*40mm with roughness of Ra0.25um max, it will just take us at least thirty times to hone this dimension. 
three. Guarantee&Promise: Guarantee&ensure interval is 6 months considering that we provide the tubes, and we are not dependable for good quality difficulty triggered by wrong unloading or storage right after cargo. We welcome customer’s inspection prior to cargo. 
4. Payment Method: We settle for payment approach like T/T, L/C, or D/P, but it relies upon on our investigation about buyers. We have a solution to appraise the credit history of customers from all in excess of the entire world, and time and sum of D/P we can launch is decided by the analysis. 
five. Quality Management: ninety% of the tubes are produced from very hot rolled seamless pipes. So, top quality of uncooked substance identified top quality of concluded tubes. We obtain uncooked substance from steady suppliers who are leading steel mills, and we inspect the uncooked substance as per the specs. In the course of our creation process, there is inspection and top quality control in each stage. 

Component III: Company INTRODUCTION
We are a manufacturer of cold drawn, cold rolled, and hydraulic cold drawn steel tubes with OD upto 356mm since 2002. Covering an spot of about 32000M2, we have 12 regular workshops with 2 hydraulic chilly drawing benches, 4 chain chilly drawing benches, and 2 ERW mills. Our services handles all the creation procedures from pickling, cold drawing, warmth managing, observed slicing, straightening, inspection, packing to further machining &turning, chilly drawing die fabrication, and products repairation&routine maintenance. 

Manufacturing facility Physical appearance:

Uncooked Materials Stock:




Noticed Slicing:



DEEP Hole Uninteresting/DRILLING:



E410 E470 Cold Drawn Seamless Carbon Steel Honed Tube for Hydraulic Cylinder

silent chain

As one of leading silent chain manufacturers, suppliers and exporters of products, We offer silent chain and many other products.

Please contact us for details.

Manufacturer supplier exporter of silent chain

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts